C.L. BLACKWELL: I am doing everything that you did except for my door is new & stained not painted but I ran into a problem. Each pc of molding has 2 Nails in it, How do I get the molding out w/out breaking it? It's very Small Molding w/ very Small Nails.
Matthew Lavergne: My works too. Used WoodPrix handbooks and build it with no problems.
Teresa Ward: Thank you so much. My grandson had shoved a toy through the pane and I was not sure how to get the wood off without breaking it. You saved me.
Christ Julius: I bought excellent handbook from WoodPrix website. Just google WoodPrix and start your journey to the better life
Tracey Masterson: Thank you!!! New home owner, single mom. Appreciate it.
grogersupci: Thanks for posting. My son accidentally broke a pane in my garage door today and I was able to replace after watching...
Ayanna Grande: You can use woodprix, it has the best handbooks and ready instructions. You can learn much from them and make it yourself.
Romelia Polly: I bought excellent handbook from woodprix website. Just google woodprix and start your journey to the better life
Jose Cora: Thank You. Totally awesome instructions.
Christ Julius: I made it by myself. I used woodprix scripts for that.
Mike Dozier: I'm halfway through my project. what type of caulking were you using/recommend?
Michael Hinchey: Where do I measure from without the molding removed or do I need to first remove the molding. Thx for the video.
Carlomar Montes Márquez: HI Michael,
How can avoid a frame like that from sagging when it is glassed?
Jason Henry: thank you!
Aaron Beer: I made it myself. Just go to woodprix webpage if you'd like do the same
Joyce Borodemos: Thank you so much for this informative video!!! I changed the glass yesterday and it only cost me $2.78 for the glass at the local hardware store. The first piece of molding was a little tricky, but I got all 4 moldings out without breaking any!
Dr. Timothy R. Morris: I have a front door with three layers: Inside and outside with tempered glass, and a decorative layer in the middle. Only the outside glass is broken, and the shattered glass sheet is still intact. DO I have to remove the broken glass sheet to get the molding out? I cut around the outer edges of the molding with a box knife, and can get tools behind it, but I cant pry the molding loose. It seems like the glass is well adhered with a glue to the inside face of the molding.
the415giant: Thanks, I have been looking for a video to show me how to remove the wooden stops. Mine are moldy and need to be replaced and or cleaned up.
How to Replace Window Pane With Wood Molding.mpg5
out of 5