EndoftheRd: My God.!
It seems a very good Vid.. Helpful but...
I can't make it work on mine..( I don't see same same set ups on Windows
7)!LINKSYS Is the GSver6
Want it as repeater cause is my second router in my home network. any
Got to say thank you..!!
Jorge Quezada: GRACIAS!!! Me fue de mucha utilidad.
Thanks a lot! Very useful.
joseph chrzempiec: hello what happens if we can't access the access point page? i follow all
the steps but i can't get the page to come up.
Eric Gundran: more power thanks for your sharing!!!! your the man....
ThrowingMueslix: Thank you. Very helpful.
irfanali vk: nice video.. i like it.. and very helpful.. i have one other doubt
regarding this, i hope you can help me..
I have a Linksys Wireless-G router (WRT54GS). It's installed and working
-- and, for the most part, seems to work flawlessly, with one exception.
Every couple of hours (and the actual time varies), it simply disconnects.
I might be in the middle of downloading a file, or browsing the Web... or
not even working on the system at all. But without any warning, I lose my
connection. The only response I've found to work is to reboot
(power-cycle) the router. This seems to work every time.
However, this is becoming quite a pain to have to do this every hour.
(And, on rare occasions, it may even be 15 minutes or less.), Is there
something in my Configuration that I need to change?
Eduardo Bovet Cid: Gracias, excelente video.
Guillermo Roquett: tell me about the music was great jajajaj can u tell me the dj and the mix
Jordan Cabrera: aww muy bueno el video ¿con esos paso puedo cabiar la contraseña de otro
wifi osea hakiarlo??
Charles McCune: I'm also setting up security cameras at the house so I will still need to
view them over the network if possible. I guess I can have a hub and then
put the wireless router off that and not worry about it and just us it for
wireless. and not networking. thats a thought.
Charles McCune: nice video. have a question. I have the Linksys router I use as my main
router but what I want to do is extend or get wireless in my house, I have
my router in my office out side but the wireless dose not make it to the
house. and I need network in the home for the kids and wife and other
internet wanted stuff. I was thinking of buying another Linksys run a
line to the home and set up another router there. but I still want access
to all in side o the house. so can I set it up as just an networked AP.
were my main router is the main hub. for all data.
Asanka Witharana: thanks you sooooo much
Donaldo M. Dagnone: Ajudou bastante!!!
Tackleb uster: after further research I think what I am looking for is a repeater so that
I can expand the range of my network
Jorge Torres: Nice song :3
btorres5x: it works on my laptop perfectly but when i try to connect to it through my
cellphone or tablet it does not work.
Tackleb uster: once you have config'd your AP router does it have to stay connect via
ethernet to a pc or can you disconnect and the router would be stand alone?
Kenric Dsouza: Tnx!
Den Lee: Very clear instructions. Thanks dude!
Michael Jensen: mega cool musik... thanks for the help!!!!
Ferdi Xkillervideos: Thanks for the help! I really appreciate it :)
Johnwilly Kamau: Thanks alot!
garylparas: Connect your AP to your DLink modem... btw, thanks for appreciating.
John Erl: nice thanks!
010slb: thanks for the help!
zxz1661: How do you find the AP's IP? I can't set my ip to static because of some
settings that were made on it.
garylparas: I'm glad I helped you.. :)
garylparas: I have experienced this issue, it's more likely a modem problem. Please try
to power reset your modem, if it still the same issue try to replace your
modem if you have a spare one. If your ISP provided the modem, you can
coordinate with them for them to check or replace your modem.
ALANSIANUQUI: Gracias amigo!
garylparas: Can you ping your AP's IP Address? Did you also reset your Access Point
(Linksys WAP54G) before re-configuring?
Mary Gold Therese Jestre: why is it that everytime i click the security mode into WPA Personal, it
always changes back to disabled. -- A Little Help please :(
Blackbird8023: Awesome video Man. I appreciate it.
Wasan9871: Excuse me, I did instructions that you teach complete. but it's only access
to the internet especially my PC only, I want to share the wireless for my
parents in my house but it's can not , It's connect to the wireless account
that i set up, but it can't surf the internet , how worng with me , please
Jordanfacekilluh: Mine is the same way. All I had to do was press the reset button on the
actual router and it was good to go.
chacha0727: gary pano to sa smart bro pwede ba? reply pls asap.. step-by-step.. salamat
Foodartiste: Hi...how do i set up WAP54G as repeater? my Router is WAG160N by Linksys. I
have tried to follow the instruction. Wifi works but could not obtain IP
address. Maybe you can help. Thank you.
Bajan Kushing: THANK YOU SO MUCH MAN! :D
ka0m3: Thank you very much! very useful video! really thanks!
twofaces31416: Love the music!!!
JDorris06: You are the only one I could find on the internet that does an easy to
follow step-by-step! Thanks so much for the direction! I'm all set now.
Javith Hussain: Hi mate, i follow ur procedure to configure the Linksys WAP54G Wireless-G
Access Point, now its works fine. but my modem connection is not working
properly. every 5 seconds it shows no internet access. Please guide me :)
Debashis Das: access point setup
Javith Hussain: Thanks for the quick reply mate. I just reset my Linksys WAP54G Wireless-G
Access Point, now it works fine with default settings :( Also my modem
connection works fine. But the issue is whenever i set the password for my
AP by following ur procedure, my AP works fine but modem connection shows
no internet access. I am confused, please guide me :)
Jorge Beckmann: gracias excelente aporte
Hari Teja Reddy P: yeah i rechecked and everything went fine...:) thanks for that :) but when
i set a password and enter it after connecting it is unable to connect to
interenet whereas when i reset it is working fine...what might have been
DeathStalkerGR001: Thank you ! Your guide is very useful but I realised that you plugged the
new router with the OLD (AP now) via an ethernet cable. Can I do this
without a cable? Without any cables , I mean, wireless .. If so I will be
grateful ! Keep up the good work
chacha0727: firstname.lastname@example.org asap lang pre.. salamat ulit...
Nick Valstar: SUPER! it works now!!
Hari Teja Reddy P: when i type 192.168.1.245 or 192.168.1.1 with all the steps gave...my
browser says webpage not available or interuppted
Linksys WAP54G Wireless-G Access Point_Basic Configuration4.6
out of 5