T-rex 500 DFC With A 500DFC Head And 3GX




People Who Liked This Video Also Liked

Redline Review: 2015 Hyundai Sonata Sport 2.0T
Redline Review: 2015 Hyundai Sonata Sport 2.0T
2010 Audi A5 2.0T Review, Walkaround, Start Up, Test Drive
2010 Audi A5 2.0T Review, Walkaround, Start Up, Test Drive
2014 Audi A4 2.0T Review - TEST/DRIVE
2014 Audi A4 2.0T Review - TEST/DRIVE
2008 Audi TT 2.0T Review, Walkaround, Exhaust, & Test Drive
2008 Audi TT 2.0T Review, Walkaround, Exhaust, & Test Drive
ETS2 Mod Reviews #5 - Scania T
ETS2 Mod Reviews #5 - Scania T

Did this video help you?

Michael Gerbase: 3GX suck use an ikon

ludo van der plaetsen: Thanks Terrance for sharing the issue. The washers are critical items. Being mismounted or not using them can cause big problems.

Terrance Bowhay: Hi Sergio had the same problem, have you removed the steel spacer washer from the old blade grips I did not. I have now used them and the problem is resolved.hope this helps

ludo van der plaetsen: Grinding the main shaft and use the old lock collar so there will be no play in the main shaft up and down. There's a little movement in the feathering shaft when moving the blades up and down. Other than that, if you assemble the main head correctly, I can't see any reason for any 'play' .

Sergio Veras: Ludocassys: Please tell me what spacers were not right. I am having problems with my upgrade (TREX500 to DFC) due to a play in the feathering shaft. The copper spacers should be a bit thicker. Could not find a solution yet. Have you?

ludo van der plaetsen: no special hardware. All stock parts. As I show at 0:52, use a grinder to smooth the new shaft and use the old collar ring. Adjust the lenght of the linkage rod's and level the swash plate.

diegardox: Hi there, I'm about to do the same upgrade on FBL for my 500CF, if it's ok with you, could you please share the hardware list you use for main rotor? Many thanks in advance, your CF rocks. Cheers.

ludo van der plaetsen: No mods made. My trex 500 is an old Trex 500 CF.

ludo van der plaetsen: Turnigy 3000mAh, 40-50C and Zippy 3000mAh, 40C. The turnigy lipo's begins to swell after one year of usage. The Zippy lipo's are better price-quality.

amartolosgr: hello, which battery are u using?flightmax 3000??c??

ludo van der plaetsen: servos are futaba S9650 for the swash, DS520 align for the tail. I bought it second hand with the servos already mounted. Thanks for the comment. Keep it in the air!

antonio santos: hi mate,,good job,,i did the same i did,,what servos are you use??i use gotech digital servo gd 9257 0.7 seconds it futaba metal gears and its amazing how that servos work,,bether than align servos,,,see my last videos what i done to my trex 500!!keep gone man,,great job
Rating:
T-rex 500 DFC with a 500DFC head and 3GX 5 out of 5

Featured Video

How To Fix Power Windows

T-rex 500 DFC with a 500DFC head and 3GX